You can use soakaway crates for attenuation in domestic and commercial projects. It is a good idea to install a soakaway crate system to control the surface water level. This is necessary for areas that are prone to flooding or experience heavy rains. You can get some at https://www.easymerchant.co.uk/soakaway-crates/. For instance, they can be combined with pipework and geotextile to create an effective attenuation system that can redirect the water collected into storm drains or where it is required at an acceptable flow rate. In this way, you minimize the risk of flooding by installing a filter to control the flow rate.
Nowadays, you can use soakaway crates to make a soakaway system. In this case, you have to wrap them in a permeable geotextile that allows the water to leak out into surrounding earth at a rate that is accepted by the ground. As a result of this, the ground can cope with all the rain water and surface without causing floors or creating stagnant water.
How Many Crates Do You Need
As noted above, you can combine the soakaway crates to make a system as large as you need. Remember that soakaway crates are modular. Thus, they can be stacked on top of each other and also next to each other. A lot of crates have a ratio of over 90%. This means that the minimal space underground is wasted on the actual structure of the crates. You should note that each soakaway crate can of a different size.
Soakaway Crate Sizes
Ideally, the size of a soakaway system is dependent on the available space, expected flow rate, and the type of soil. In most cases, you will require about three soakaway crates per a meter cubic. However, this does vary depending on the model and brand of the crate. You can find models that are smaller. These are ideal for small objects. In addition, they are quite convenient for transportation. For instance, it is easier to transport 20 small crates as compared to transporting 10 large ones. Remember that most soakaway crates are collapsible.
Soakaway Crate Installation
Taking into account the soil conditions, sizes of available crates, and the estimated water flow rate, you can start by excavating the site where you plan to install the soakaway crates. After doing this, you can then level the ground. This is necessary to ensure it is stable.